 |
|
 |
 |
Check out our Videos to see how it's done.
|
|
|
|
|
PD - 4
|
Quick to set up and easy to use, the Pow-r Mole makes the sometimes difficult job of boring a road effortless, even in the hardest of soils. The compact size, light weight and power of the "PD-4" are the features that companies find most appealing. It easily fits into the back of a pickup truck and only requires four feet of space to set up.
SPECIFICATIONS:
-Height: Overall 15" Length: 46"
-Drive Stroke: 10" Weight: 190 lbs.
-Jaw Type: Automatic Hydraulic
-Pushing Force: 37,714 lbs. @ 3,000 PSI
-Pushing Rate: Up to 9' per minute
Even though our state-of-the-art steering heads are great, they are not required for most applications. Steering the rods is a boon for line and grade applications, such as sewer lateral installations, or those occasional three hundred foot pushes, but most of the time it just slows down the operation. Correcting a misguided bore by using a Pow-r Mole Repositioning Head is quicker, easier and cheaper than trying to "steer" the rods across the road.
No water or bentonite is needed with a Pow-r Mole. It is great for cold weather applications or residential areas where a gray, slimy slurry pond would irritate the neighborhood. The only thing worse than wasting valuable time with an outdated boring tool is trying to get parts for it. At Pow-r Mole you won't hear "I'm sorry, we don't stock that part, and it could be a while before we can get one." All parts are kept on stock for immediate shipment.
A Pow-r Mole Pipe Pusher is like a certain pink rabbit; it just keeps going and going and going.
|
|
PORTABLE POWER UNIT
|
THIS HYDRAULIC POWER PACK IS COMPACT, PROTABLE AND POWERFUL.
SPECIFICATIONS:
-PORTABLE WHEELED UNIT
-20 HP HONDA MOTER
-19 GPM
-TWO STAGE PUMP
-3000 PSI
-10 MICRON FILTRATION
-ELECTRIC START
-PRESSURE GAUGE
-HYDRAULIC OIL COOLER
-12 VOLT COOLING FAN
|
|
PD - 6
|
|
The Model Pd-6 Pipe Pusher-Puller was designed for use in difficult soil conditions where a pipe or cable is to be installed under a road or area which cannot be dug. The PD-6 is excellent in areas where space is limited and requires a trench only 56" long to operate. The PD-6 can install up to 8" OD pipe in most compressable soils.
SPECIFICATIONS:
-Height: Overall 17" Length: 54"
-Drive Stroke: 12" Weight: 720 lbs.
-Jaw Type: Automatic Hydraulic
-Pushing Force: 84,822 lbs. @ 3,000 PSI
-Pushing Rate: Up to 7' per minute
|
|
PD - 7
|
The Pow-R Mole Model "PD-7" is designed for "Push or Pull" operations.
Specifications Power: ----------------------- 55 tons @ 300 PSI
Cylinder ID: ---------------- 7"
Overall dimensions:
Length: ------------ 72"
Width: ------------- 21.5"
Height: ------------ 19.5" Weight: ------------------------------------------------ 1,040 Pounds
Preferred Hydraulic Pressure: ----------------- 3000 PSI
Preferred Hydraulic Flow: ----------------------- 30-35 GPM
By popular request from the pipeline rehabilitation industry Pow-R Mole has designed two new pusher/pullers and a new hydraulic pump to power them. These machines offer more power in a smaller package than any other pusher/puller on the market. The pushers use a new two inch diameter push rod. Each rod has a tapered male and female thread for quick assembly. They are available in thirty inch lengths and three meter lengths (39.4"). A carrying box is available for the rods.
|
|
PD-33
|
THE POW-R MOLE MODEL PD-33 IS DESIGNED TO BURST AND REPLACE EXISTING PIPELINES IN THE MOST DIFFICULT SOIL CONDITIONS. THE PD-33 IS CAPABLE OF SPLITTING CLAY, CONCRETE AND CAST IRON PIPE FROM 3" TO 8".
SPECIFICATIONS:
-30 TON OF PULL FORCE
-FOOT PRINT OF ONLY 18" WIDE AND 26" LONG
-BREAKING CONE AND INTERNAL PULLER AVAILABLE FOR 3" TO 12" PIPE
-QUICK RELEASE JAW SYSTEM
-MODULAR CONSTRUCTION
-CYLINDER ACTIVATED NON SLIP JAWS
-3/4" CABLE W/SPELTER END AND BASKET
-TWO FOOT STROKE
|
|
PD - 8
|
The Pow-R Mole Model "PD-8" is the machine of choice for pipeline rehabilitation work.
Specifications
Power: ----------------------- 75 tons @ 300 PSI
Cylinder ID: ---------------- 8"
Overall dimensions:
Length: ------------ 64.5"
Width: ------------- 30"
Height: ------------ 27"
Weight: ------------------------------------------------ 1,920 Pounds
Preferred Hydraulic Pressure: ----------------- 3000 PSI
Preferred Hydraulic Flow: ----------------------- 30-35 GPM
By popular request from the pipeline rehabilitation industry Pow-R Mole has designed two new pusher/pullers and a new hydraulic pump to power them. These machines offer more power in a smaller package than any other pusher/puller on the market. The pushers use a new two inch diameter push rod. Each rod has a tapered male and female thread for quick assembly. They are available in thirty inch lengths and three meter lengths (39.4"). A carrying box is available for the rods.
|
|
Diesel Dragon
|
The Pow-R Mole Model "HP-35" Hydraulic Pump
Recommended for use with Models PD-6, PD-7, & PD-8 Pushers
Specifications
Engine: ----------------------- 58 H.P. Volkswagen Diesel
Controls: --------------------- Up Front "Single Station" Design
Overall dimensions:
Length: ------------- 60"
Width: -------------- 30"
Height: ------------- 52"
Hydraulic Pressure: ------------------------------------------------ 3000 PSI
Hydraulic Flow: ------------------------------------------------------ 35 GPM
Weight: ----------------------------------------------------------------- 1,700 Pounds
Fuel Capacity: ------------------------------------------------------ 19 Gallons (US)
Hydraulic Oil Capacity: ------------------------------------------ 37 Gallons (US)
Noise Abatement: ------------------------------------------------- Fully Shrouded, Sound Suppressed (89 db)
Hydraulic Quick Couplers: -------------------------------------- Flat Faced 1" Full Flow
Hydraulic Hose Requirements: ------------------------------- 1" Return, 3/4" Pressure
By popular request from the pipeline rehabilitation industry Pow-R Mole has designed two new pusher/pullers and a new hydraulic pump to power them. These machines offer more power in a smaller package than any other pusher/puller on the market. The pushers use a new two inch diameter push rod. Each rod has a tapered male and female thread for quick assembly. They are available in thirty inch lengths and three meter lengths (39.4"). A carrying box is available for the rods.
|
|
Pusher Box
|
|
|
Pow-r Stinger
|
The HP-19 hydraulic pump is a unique blend of engineering and application. Four by four tubing provides both a frame in which to mount the components and a reservoir for the hydraulic oil. The efficient, axial piston pump and the huge surface area of the frame provide cooling for the hydraulic oil and protect the engine and other components from damage.
The 20 HP OHV Honda engine meets or exceeds all EPA requirements, has a pressurized, oil filtration system and electric start. It provides 3000PSI to the "PD-4" Pipe Pusher at minimal throttle setting, keeping engine noise to a minimum.
OPTIONS
- Flat Faced hydraulic quick couplers
- Gauge panel, includes ammeter, hydraulic oil pressure hour meter
- Oil Cooler
- Auxiliary tool circuit for low pressure applications
Up-Front controls, with optional flat-faced quick couplers (cup and prong style are standard). The optional gauge panel includes hydraulic oil pressure, ammeter and hour meter.
SPECIFICATIONS
- Maximum pressure: 3000 PSI
- Maximum volume: 19 GPM
- Outside Dimensions: 46.5"LX 20"W X 19.5"H
- Weight with oil: 450#
|
|
|
